Ixxat PC interfaces enable flexible access to CAN or Industrial Ethernet networks from a PC — for development, commissioning, maintenance, control and monitoring. Available for all common PC interface standards and form factors.
Interchangeable extension card for enhanced connectivity
This extension card enhances Ewon Flexy's connectivity with a single WAN Ethernet port. It is compatible with the Ewon Flexy 10x, 20x series and 205.
Replaced by: IN701KNX3K00000
Designed for the integration of any Modbus RTU or TCP server device, or both simultaneously, with any KNX device or system. This integration aims to make Modbus register data and resources accessible from a KNX system as if they were a part of the KNX system and vice versa. Please refer to the new product reference for further details.
Provides high-speed wireless access for machines in industrial environments.
The Anybus Wireless access points provide wireless connectivity at high data rates. Developed for indoor and outdoor industrial settings and with wireless mesh, the Anybus Wireless access points ensure a highly reliable network setup. This access point has an IP67-rated casing, providing protection against dust and water.
Web-based SCADA & HMI software for process visualization
i4scada is a web-based SCADA & HMI software for operating and monitoring various machines and plants. It allows you to easily create modern process visualizations in individual design for various machines, systems and production plants.
Enabling connectivity and protection for CAN components
The Ixxat CAN-CR220 repeater with two CAN interfaces provides a galvanic isolation up to 4 kV for enhanced protection of network segments. It improves the CAN bus load capacity, establishes a physical coupling of bus systems and provides the flexibility to optimize network structures. The CAN-CR220 meets DIN/EN 50178 standards.
Web-based SCADA & HMI software for process visualization
i4scada is a web-based SCADA & HMI software for operating and monitoring various machines and plants. It allows you to easily create modern process visualizations in individual design for various machines, systems and production plants.
Enabling connectivity for computer systems to CAN networks via PCIe
The Ixxat CAN-IB200/PCIe is an active PCI Express interface card with one CAN channel and galvanic isolation. It is an easy and cost-efficient way to connect computers to a CAN bus network. Based on a modular design, the card enables simple integration into diverse industrial setups, supporting various CAN applications.
Connection cable of 2m for Wifi Antenna Ewon Cosy+ and Flexy
This 2 meter antenna connection cable can be used to connect the Wifi antenna on the Ewon Cosy+ and Flexy. Compatible with the antenna FAC91101_0000.
Enabling connectivity to CAN networks via USB
The Ixxat USB-to-CAN V2 embedded with galvanic isolation is an easy and cost-efficient way to connect a computer with an internal USB connection to a CAN bus network. It enables simple integration into diverse industrial setups, supporting various CAN applications, from testing and development to maintenance and control tasks.
Enabling connectivity for computer systems to CAN networks via PCI
The Ixxat CAN-IB300/PCI is a passive PCI interface card with two CAN channels and galvanic isolation. It is an easy and cost-efficient way to connect computers to a CAN bus network. Based on a modular design, the card enables simple integration into diverse industrial setups, supporting various CAN applications.
Web-based SCADA & HMI software for process visualization
i4scada is a web-based SCADA & HMI software for operating and monitoring various machines and plants. It allows you to easily create modern process visualizations in individual design for various machines, systems and production plants.
LonWorks TP/FT-10 to BACnet/IP & MS/TP - 600 points
Integrate any LON device or installation with a BACnet BMS or any BACnet/IP or BACnet MS/TP controller. This integration aims to make LON devices, their network variables (SNVT), and resources accessible from a BACnet-based control system or device as if they were a part of the BACnet system and vice versa.
Replaced by: IN7004856000000
Designed for the integration of any Modbus RTU or TCP server device, or both simultaneously, with a BACnet BMS or any BACnet/IP or BACnet MS/TP controller. This integration aims to make Modbus signals and resources accessible from a BACnet-based control system or device as if they were a part of the BACnet system and vice versa. Please refer to the new product reference for further details.
I/O Extension Module with Modbus RTU Interface
I/O Extension Module with Modbus RTU Interface
Web-based SCADA & HMI software for process visualization
i4scada is a web-based SCADA & HMI software for operating and monitoring various machines and plants. It allows you to easily create modern process visualizations in individual design for various machines, systems and production plants.
Enabling connectivity for computer systems to PROFINET IRT networks
The Ixxat INpact PIR Slave M.2 is a versatile and efficient solution to connect PC-based slave applications to Profinet IRT networks. This preconfigured variant features a very space-saving M.2 format and delivers precise, isochronous real-time data exchange, ideal for motion control and synchronized tasks.
Web-based SCADA & HMI software for process visualization
i4scada is a web-based SCADA & HMI software for operating and monitoring various machines and plants. It allows you to easily create modern process visualizations in individual design for various machines, systems and production plants.
18-pole connector for Flexy 8DI-4AI-2DO Extention card (FLX3402)
This 18-pole connector allows to screw the DI, AI and DO wires onto the FLX3402 Extention card. A connector is already included in every shipment of the FLX3402.
