Support for Embedded network interfaces

Anybus Communicator – PROFINET IO Device to PROFIBUS DP Device

A protocol converter that connects PROFINET IO and PROFIBUS DP control systems

Item number: ABC4023-A

The Anybus Communicator PROFINET IO Device to PROFIBUS DP Device enables you to connect any PROFINET IO control system to any PROFIBUS DP control system. Anybus Communicators ensure reliable, secure, high-speed data transfers between different industrial networks. Thanks to our intuitive web-based user interface, they're also incredibly easy to use.

Anybus Communicator – PROFINET IO Device to EtherCAT salve

A protocol converter that connects PROFINET IO and EtherCAT control systems

Item number: ABC4020-A

The Anybus Communicator PROFINET IO Device to EtherCAT slave enables you to connect any PROFINET IO control system to any EtherCAT control system. Anybus Communicators ensure reliable, secure, high-speed data transfers between different industrial networks. Thanks to our intuitive web-based user interface, they're also incredibly easy to use.

Anybus Communicator – CAN to EtherCAT

A protocol converter that connects CAN devices to EtherCAT control systems.

Item number: AB7311-B

The Anybus Communicator – CAN to EtherCAT converts CAN protocols to EtherCAT, enabling you to connect any CAN-based device or equipment to EtherCAT control systems. Anybus Communicators ensure reliable, secure, high-speed data transfers between different industrial networks while being easy to use. 

Anybus X-gateway – CANopen Master – EtherCAT Slave

A protocol converter that connects CANopen devices to EtherCAT PLCs

Item number: AB7300-B

The Anybus X-gateway CANopen Master to EtherCAT Slave enables you to connect any CANopen Master device or equipment to EtherCAT control systems. It can be used when there is no existing CANopen control system. Anybus gateways ensure reliable, secure, high-speed data transfers between different industrial networks while being easy to use.

Anybus .NET Bridge – PROFIBUS to .NET Bridge

Connect a function block in a PLC and a .NET solution on a PC.

Item number: AB9071-C

The Anybus PROFIBUS to .NET Bridge converts PROFIBUS to C#, enabling you to connect any PROFIBUS PLC control system with any .NET solution on a PC. The .NET Bridge uses simulators and code generators to simplify integration.

Anybus Defender 6004 - PRO/FW

Industrial Security Appliance with Enhanced Routing and VPN capabilities for OT-SDWAN

Item number: ABD6004-PROFW

Advanced industrial security appliance engineered to provide unparalleled protection for operational technology (OT) networks. Featuring a robust combination of NAT, Routing, Deep Packet Inspection (DPI), and VPN Server and Client functionalities it protects OT assets and can build secure network connectivity over wide area networks.

Anybus CompactCom Connector Board - Ethernet 1Gbit

Network connectors - ready for use together with the CompactCom Brick

Item number: AB6669-B

Used together with the CompactCom Brick to get quick and easy access to network connectors.

Anybus CompactCom Connector Board - CC-Link

Network connectors - ready for use together with the CompactCom Brick

Item number: AB6665-B

Used together with the CompactCom Brick to get quick and easy access to network connectors.

Anybus X-gateway – DeviceNet Scanner to EtherNet/IP Device

A protocol converter that connects DeviceNet devices to EtherNet/IP PLCs.

Item number: AB7607-C

The Anybus X-gateway DeviceNet Scanner to EtherNet/IP Device enables you to connect any DeviceNet device or equipment to EtherNet/IP control systems. It can be used when there is no existing DeviceNet control system. Anybus gateways ensure reliable, secure, high-speed data transfers between different industrial networks while being easy to use.

Anybus .NET Bridge – PROFINET to .NET Bridge

Connect a function block in a PLC and a .NET solution on a PC.

Item number: AB9077-C

The Anybus PROFINET to .NET Bridge converts PROFINET to C#, enabling you to connect any PROFINET PLC control system with any .NET solution on a PC. The .NET Bridge uses simulators and code generators to simplify integration.

Anybus Wireless Bolt 5G

Enable wireless industrial communication via 5G

Item number: AWB7000-A

The Anybus Wireless Bolt 5G connects industrial devices and machines to 5G networks, enabling low latency, high throughput, and high reliability. Combined with the Anybus Tunnel Gateway, it enables communication on PROFINET, EtherNet/IP, or Modbus TCP networks over 5G. Its bolt-on form factor with IP67 protection facilitates versatile deployment.

DALI-2 to Modbus TCP Server Application with 2 DALI channels

DALI to Modbus TCP - 2 DALI channels

Item number: IN704DAL1280000

Integrate any DALI/DALI-2 driver and DALI-2 light sensor or occupancy sensor with a Modbus BMS or any Modbus TCP controller. This integration aims to make DALI devices and their data and resources accessible from a Modbus-based control system or device as if they were a part of the Modbus system and vice versa.

KNX TP to Modbus TCP & RTU Server Application

KNX to Modbus TCP & RTU - 1200 points

Item number: IN701KNX1K20000

Integrate any KNX device or installation with a Modbus BMS or any Modbus TCP or Modbus RTU controller. This integration aims to make KNX communication objects and resources accessible from a Modbus-based control system or device as if they were a part of the Modbus system and vice versa.

Mitsubishi Electric City Multi systems to BACnet/IP & MS/TP Application

Mitsubishi Electric to BACnet/IP & MS/TP - Up to 50 groups

Item number: IN770AIR00SO000

The Mitsubishi Electric application has been specially designed to allow bidirectional control and monitoring of Mitsubishi Electric City Multi systems from a BMS, SCADA, PLC, or any other device working as a BACnet/IP server or a BACnet MS/TP client. The solution allows the integration of up to 50 groups from a single interface.

KNX TP to BACnet/IP & MS/TP Server Application

KNX to BACnet/IP & MS/TP - 3000 points

Item number: IN701KNX3K00000

Integrate any KNX device or installation with a BACnet BMS or any BACnet/IP or BACnet MS/TP controller. This integration aims to make KNX communication objects and resources accessible from a BACnet-based control system or device as if they were a part of the BACnet system and vice versa.

Panasonic ECOi, PACi, ECOg / PAC, VRF systems to BACnet IP/MSTP Application

Panasonic to BACnet/IP & MS/TP - Up to 64 Indoor Units

Item number: IN770AIR00MO000

The Panasonic application has been specially designed to allow bidirectional control and monitoring of Panasonic ECOi, PACi, ECOg / PAC, VRF systems from a BMS, SCADA, PLC, or any other device working as a BACnet/IP server or a BACnet MS/TP client. The solution allows the integration of up to 64 indoor units from a single interface.

Fujitsu VRF systems to BACnet/IP & MS/TP Application

Fujitsu to BACnet/IP & MS/TP - Up to 16 Indoor Units

Item number: IN775FGL00SO000

The Fujitsu application has been specially designed to allow bidirectional control and monitoring of Fujitsu VRF systems from a BMS, SCADA, PLC, or any other device working as a BACnet/IP server or a BACnet MS/TP client. The solution allows the integration of up to 16 indoor units from a single interface.

Mitsubishi Heavy Industries VRF systems to Home Automation Application

Mitsubishi Heavy Industries to Home Automation - Up to 64 Indoor Units

Item number: IN776MHI00MO000

The Mitsubishi Heavy Industries application has been specially designed to allow bidirectional control and monitoring of Mitsubishi Heavy Industries VRF systems from a Home Automation system. The solution allows the integration of up to 64 indoor units from a single interface.