![Anybus CompactCom Connector Board - CANopen](https://media.hms-networks.com/image/upload/c_fill,g_auto,f_auto,q_auto,dpr_auto,e_sharpen,w_400/v1714120764/Products/Anybus/Anybus_accessory.png)
Anybus CompactCom Connector Board - CANopen
Network connectors - ready for use together with the CompactCom Brick
Item number: AB6667-B
Used together with the CompactCom Brick to get quick and easy access to network connectors.
Gateways (protocol converters) are the fastest way to get devices connected to industrial and building networks. Just connect, configure and you’re done! HMS offers more than 600 unique network connectivity gateways that connect machines, devices, vehicle networks, PLCs and systems from different vendors.
Network connectors - ready for use together with the CompactCom Brick
Used together with the CompactCom Brick to get quick and easy access to network connectors.
Replaced by: IN704DAL1280000
Designed for the integration of any DALI/DALI-2 driver and DALI-2 input devices with a BACnet BMS or any BACnet/IP or BACnet MS/TP controller. This integration aimed to make DALI devices, their data and resources, accessible from a BACnet-based control system as if they were a part of the BACnet system itself. Please refer to the new product reference for further details.
A protocol converter that connects CC-Link and Modbus RTU control systems
The Anybus X-gateway CC-Link Slave to Modbus RTU Slave enables you to connect any CC-Link system to any Modbus RTU control system. Anybus gateways ensure reliable, secure, high-speed data transfers between different industrial networks while being easy to use.
A protocol converter that connects FIPIO and Lonworks control systems
The Anybus X-gateway FIPIO Slave to Lonworks Slave enables you to connect any FIPIO system to any Lonworks control system. Anybus gateways ensure reliable, secure, high-speed data transfers between different industrial networks while being easy to use.
A protocol converter that connects EtherNet/IP devices to Modbus Plus PLCs
The Anybus X-gateway EtherNet/IP Master to Modbus Plus Slave enables you to connect any EtherNet/IP device or equipment to Modbus Plus control systems. It can be used when there is no existing EtherNet/IP control system. Anybus gateways ensure reliable, secure, high-speed data transfers between different industrial networks while being easy to use.
A protocol converter that connects EtherCAT and POWERLINK control systems
The Anybus X-gateway EtherCAT Slave to POWERLINK Device enables you to connect any EtherCAT control system to any POWERLINK control system. Anybus gateways ensure reliable, secure, high-speed data transfers between different industrial networks while being easy to use.
A protocol converter that connects ControlNet and FIPIO control systems
The Anybus X-gateway ControlNet Adapter to FIPIO Slave enables you to connect any ControlNet control system to any FIPIO control system. Anybus gateways ensure reliable, secure, high-speed data transfers between different industrial networks while being easy to use.
Industrial VPN gateway for IIoT data collection & monitoring
The Ewon Flexy is a multipurpose IIoT data gateway that allows machine builders and users to monitor and collect vital KPIs for analysis and predictive maintenance. The Ewon Flexy 201 is an Ewon gateway based on a 4 Ethernet ports.
A protocol converter that connects Interbus CU and PROFIBUS control systems
The Anybus X-gateway Interbus CU Slave to PROFIBUS Slave enables you to connect any Interbus CU system to any PROFIBUS control system. Anybus gateways ensure reliable, secure, high-speed data transfers between different industrial networks while being easy to use.
I/O Extension Module with Modbus RTU Interface
I/O Extension Module with Modbus RTU Interface - 8 Analog Inputs
A protocol converter that connects CAN devices to PROFIBUS control systems.
The Anybus Communicator – CAN to PROFIBUS DP-V1 converts CAN protocols to PROFIBUS, enabling you to connect any CAN-based device or equipment to PROFIBUS control systems. Anybus Communicators ensure reliable, secure, high-speed data transfers between different industrial networks while being easy to use.
A protocol converter that connects EtherCAT and Interbus CU control systems
The Anybus X-gateway EtherCAT Slave to Interbus CU Slave enables you to connect any EtherCAT system to any Interbus CU control system. Anybus gateways ensure reliable, secure, high-speed data transfers between different industrial networks while being easy to use.
Enabling connectivity and protection for CAN components
The Ixxat CAN-CR100 repeater with two CAN/CAN FD interfaces improves the CAN bus load capacity, establishes a physical coupling of bus systems and offers galvanic isolation. It provides the flexibility to optimize network structures and liberates them from CAN bus structure constraints for optimized operation.
ST Cloud Control to BACnet MS/TP or IP or Modbus RTU and TCP - 16 devices
Intesis ST Cloud Control is a bidirectional cloud-based solution to monitor and control any BACnet or Modbus device, whether from a web-based dashboard or an end-user-oriented app. The solution allows the integration of up to 16 devices, with up to 12 widgets per device. Widgets can be shared/split between the devices connected to the same gateway.
A protocol converter that connects serial devices to Modbus TCP control systems
The Anybus Communicator Serial Master to Modbus TCP enables you to connect any RS-232/485 device or equipment to Modbus TCP control systems. Anybus Communicators ensure reliable, secure, and high-speed data transfers between different industrial networks. Thanks to our intuitive web-based user interface, they're also incredibly easy to use.
A protocol converter that connects EtherNet/IP and Modbus Plus control systems
The Anybus X-gateway EtherNet/IP Adapter to Modbus Plus Slave enables you to connect any EtherNet/IP system to any Modbus Plus control system. Anybus gateways ensure reliable, secure, high-speed data transfers between different industrial networks while being easy to use.
Enabling easy CAN FD network monitoring and expansion over Ethernet
The Ixxat CAN@net NT 420 is a multifunctional gateway, bridging CAN and Ethernet networks for remote access and enhanced reliability. It features four CAN channels, thereof two CAN FD capable, and supports long-distance communication, with several message processing and cloud connection functionalities. For more efficient network management.
Enabling connectivity for computer systems to PROFINET IRT networks
The Ixxat INpact PIR Slave M.2 Bracket Kit is a versatile and efficient solution to connect PCs to Profinet IRT networks. This preconfigured variant features a very space-saving M.2 format and delivers isochronous real-time data exchange, ideal for motion control tasks. The kit includes a connection cable, bus coupling unit, and mini bracket.