Language
Configurable automotive platform (1 x FlexRay, 4 x CAN + 4 x CAN FD)
Item number 1.13.0094.10507
The Ixxat FRC-EP190 FlexRay Plus 4 is a powerful solution for automotive uses, merging multiple bus systems with FlexRay, LIN and eight CAN channels, thereof four CAN FD and two CAN low-speed capable. It's ideal for logging, gateway, and residual bus simulation tasks – easily configurable with the Ixxat Advanced Configuration Tool (ACT).
The FRC-EP190 enables easy integration of multiple bus systems into a single, compact device. This is essential for e-mobility projects and complex industrial applications.
Supports industrial protocols, including FlexRay and EtherCAT, facilitating high-speed data transfer and network integration for complex applications – especially suited for automotive engineering.
Additional interfaces included: 2 x LIN, 1 x Ethernet (10/100 Base-T), 4 x Digital in/out (A/E), USB 2.0 device and host and a SDHC slot. Further extension options are available.
The FRC-EP190 series streamlines data management and protocol handling, optimized for automotive testing, logging and gateway operations. Ensuring easy integration and reliable performance.
All applications run on the device, a PC is only needed for configuration or stimulation/visualization of data, as the actual intelligence is outsourced to the embedded platform.
Galvanic isolation safeguards against overvoltage and protects from potential electrical damage.
The platform is supported by the Ixxat ACT (Advanced Configuration Tool), a Windows-based tool to easily configure the device via drag and drop. Most use cases can be solved by using ACT Freeware.
Interfaces and application areas of the universal applicable gateway, logger and restbus simulation solution at a glance.
A protocol converter that connects Modbus RTU and POWERLINK control systems
The Anybus X-gateway Modbus RTU Slave to POWERLINK Device enables you to connect any Modbus RTU system to any POWERLINK control system. Anybus gateways ensure reliable, secure, high-speed data transfers between different industrial networks while being easy to use.
A protocol converter that connects EtherCAT and Interbus CU control systems
The Anybus X-gateway EtherCAT Slave to Interbus CU Slave enables you to connect any EtherCAT system to any Interbus CU control system. Anybus gateways ensure reliable, secure, high-speed data transfers between different industrial networks while being easy to use.
Enable seamless integration of serial devices to Studio 5000
The Anybus EtherNet/IP to Modbus TCP Linking Device converts Modbus TCP to EtherNet/IP, enabling you to connect any Modbus TCP device to a Logix PLC control system. The linking device presents Modbus TCP data as easily processed I/O data, offloading the PLC from working with extra calculations and allowing for seamless integration with Studio 5000.
The Ixxat SG-gateway is used to integrate various industrial and energy-related devices into SCADA or cloud systems. It enables secure and reliable communication between energy systems, control rooms and industrial automation systems.
A protocol converter that connects Modbus TCP and Modbus TCP control systems
The Anybus X-gateway Modbus TCP Server to Modbus TCP Server enables you to connect any Modbus TCP control system to any Modbus TCP control system. Anybus gateways ensure reliable, secure, high-speed data transfers between different industrial networks while being easy to use.
A protocol converter that connects AS-Interface devices to PROFINET-IRT PLCs
The Anybus X-gateway AS-Interface Master to PROFINET IRT Device enables you to connect any AS-Interface device or equipment to PROFINET IRT control systems. It can be used when there is no existing AS-Interface control system. Anybus gateways ensure reliable, secure, high-speed data transfers between different industrial networks while being easy to use.
A protocol converter that connects DeviceNet devices to Modbus RTU PLCs
The Anybus X-gateway DeviceNet Master to Modbus-RTU Slave enables you to connect any DeviceNet device or equipment to Modbus-RTU control systems. It can be used when there is no existing DeviceNet control system. Anybus gateways ensure reliable, secure, high-speed data transfers between different industrial networks while being easy to use.
A protocol converter that connects Interbus CU and Modbus TCP control systems
The Anybus X-gateway Interbus CU Slave to Modbus TCP Server enables you to connect any Interbus CU system to any Modbus TCP control system. Anybus gateways ensure reliable, secure, high-speed data transfers between different industrial networks while being easy to use.
A protocol converter that connects CANopen and PROFINET-IRT FO control systems
The Anybus X-gateway CANopen Slave to PROFINET-IRT FO Device enables you to connect any CANopen system to any PROFINET-IRT FO control system. Anybus gateways ensure reliable, secure, high-speed data transfers between different industrial networks while being easy to use.
KNX to Modbus TCP & RTU - 250 points
Integrate any KNX device or installation with a Modbus BMS or any Modbus TCP or Modbus RTU controller. This integration aims to make KNX communication objects and resources accessible from a Modbus-based control system or device as if they were a part of the Modbus system and vice versa.
A protocol converter that connects DeviceNet devices to PROFIBUS PLCs
The Anybus X-gateway DeviceNet Master to PROFIBUS Slave enables you to connect any DeviceNet device or equipment to PROFIBUS control systems. It can be used when there is no existing DeviceNet control system. Anybus gateways ensure reliable, secure, high-speed data transfers between different industrial networks while being easy to use.
A protocol converter that connects EtherNet/IP and EtherNet Modbus TCP control systems
The Anybus X-gateway EtherNet/IP Slave -Ethernet Modbus TCP Slave enables you to connect any Modbus TCP system to any EtherNet/IP control system. Anybus gateways ensure reliable, secure, high-speed data transfers between different industrial networks while being easy to use.
(product was not in this initial legacy product list)
KNX to Modbus TCP & RTU - 1200 points
Integrate any KNX device or installation with a Modbus BMS or any Modbus TCP or Modbus RTU controller. This integration aims to make KNX communication objects and resources accessible from a Modbus-based control system or device as if they were a part of the Modbus system and vice versa.
A protocol converter that connects CANopen devices to DeviceNet PLCs
The Anybus X-gateway CANopen Master to DeviceNet Adapter enables you to connect any CANopen Master device or equipment to DeviceNet control systems. It can be used when there is no existing CANopen control system. Anybus gateways ensure reliable, secure, high-speed data transfers between different industrial networks while being easy to use.
A protocol converter that connects Interbus FO and PROFINET-IO control systems
The Anybus X-gateway Interbus FO Slave to PROFINET-IO Device enables you to connect any Interbus FO system to any PROFINET-IO control system. Anybus gateways ensure reliable, secure, high-speed data transfers between different industrial networks while being easy to use.
The CAN-GW100/RS232 is a CAN to RS232 gateway enabling connection of devices with RS232 interface to CAN systems. The device offers an CANopen operation mode for easy integration into CANopen based environments.
A protocol converter that connects POWERLINK and POWERLINK control systems
The Anybus X-gateway POWERLINK Device to POWERLINK Device enables you to connect any POWERLINK system to any POWERLINK control system. Anybus gateways ensure reliable, secure, high-speed data transfers between different industrial networks while being easy to use.
A protocol converter that connects ControlNet and Modbus RTU control systems
The Anybus X-gateway ControlNet Adapter to Modbus RTU Slave enables you to connect any ControlNet control system to any Modbus RTU control system. Anybus gateways ensure reliable, secure, high-speed data transfers between different industrial networks while being easy to use.
BACnet/IP & MS/TP to Modbus TCP & RTU - 3000 points
Integrate any BACnet MS/TP or BACnet/IP server device with a Modbus BMS or any Modbus TCP or RTU controller. This integration aims to make BACnet objects, data, and resources accessible from a Modbus-based control system or device as if they were a part of the Modbus system and vice versa.
BACnet/IP & MS/TP to KNX - 600 points
Integrate any BACnet MS/TP or BACnet/IP server device with any KNX device or system. This integration aims to make BACnet objects data and resources accessible from a KNX system as if they were a part of the KNX system and vice versa.
Configurable automotive platform (6 x CAN + 2 x CAN FD)
The Ixxat FRC-EP170 Plus CANonly is a compact solution for automotive uses, focusing on CAN-based operations. Featuring LIN and six CAN channels, thereof two CAN FD and one CAN low-speed capable, it's ideal for logging, gateway, and residual bus simulation applications – easily configurable with the Ixxat Advanced Configuration Tool (ACT).
Replaced by: IN701KNX1000000
Designed for the integration of any KNX device or installation with a BACnet BMS or any BACnet/IP or BACnet MS/TP controller. This integration aimed to make KNX communication objects and resources accessible from a BACnet-based control system or device as if they were a part of the BACnet system and vice versa. Please refer to the new product reference for further details.
DALI-2 to Modbus TCP - 1 DALI channel
Integrate any DALI/DALI-2 driver and DALI-2 light sensor or occupancy sensor with a Modbus BMS or any Modbus TCP controller. This integration aims to make DALI devices and their data and resources accessible from a Modbus-based control system or device as if they were a part of the Modbus system and viceversa.
A protocol converter that connects EtherCAT and Lonworks control systems
The Anybus X-gateway EtherCAT Slave to Lonworks Slave enables you to connect any EtherCAT system to any Lonworks control system. Anybus gateways ensure reliable, secure, high-speed data transfers between different industrial networks while being easy to use.
A protocol converter that connects serial devices to PROFINET-IRT control systems.
The Anybus Communicator – Serial Master to PROFINET-IRT converts serial protocols to PROFINET-IRT, enabling you to connect any RS-232/485 device or equipment to PROFINET-IRT control systems. Anybus Communicators ensure reliable, secure, high-speed data transfers between different industrial networks while being easy to use.
The Ixxat SG-gateway is used to integrate various industrial and energy-related devices into SCADA or cloud systems. It enables secure and reliable communication between energy systems, control rooms and industrial automation systems.
BACnet/IP & MS/TP to Modbus TCP & RTU - 250 points
Integrate any BACnet MS/TP or BACnet/IP server device with a Modbus BMS or any Modbus TCP or RTU controller. This integration aims to make BACnet objects, data, and resources accessible from a Modbus-based control system or device as if they were a part of the Modbus system and vice versa.
A protocol converter that connects Modbus TCP devices to Modbus TCP PLCs
The Anybus X-gateway Modbus TCP Client to Modbus TCP Server enables you to connect any Modbus TCP device or equipment to Modbus TCP control systems. It can be used when there is no existing Modbus TCP control system. Anybus gateways ensure reliable, secure, high-speed data transfers between different industrial networks while being easy to use.
Replaced by: IN7004851K20000
Designed for the integration of any Modbus RTU or TCP server device, or both simultaneously, with a BACnet BMS or any BACnet/IP or BACnet MS/TP controller. This integration aims to make Modbus signals and resources accessible from a BACnet-based control system or device as if they were a part of the BACnet system and vice versa. Please refer to the new product reference for further details.
M-BUS to Modbus TCP & RTU - 60 devices
Integrate any M-Bus device with a Modbus BMS or any Modbus TCP or Modbus RTU controller. This integration aims to make M-Bus devices, their registers, and resources accessible from a Modbus-based control system or device as if they were a part of the Modbus system and vice versa.
A protocol converter that connects Modbus TCP devices to EtherCAT control systems
The Anybus Communicator Modbus TCP Client to EtherCAT enables you to connect Modbus TCP devices to EtherCAT control systems. Anybus Communicators ensure reliable, secure, and high-speed data transfer between different industrial networks. Thanks to our intuitive web-based user interface, they're also incredibly easy to use.
A protocol converter that connects Ethernet and PROFIBUS DP control systems
The Anybus Communicator Ethernet to PROFIBUS DP device ATEX enables you to connect any Ethernet control system to any PROFIBUS DP control system. Anybus Communicators ensure reliable, secure, high-speed data transfers between different industrial networks. Thanks to our intuitive web-based user interface, they're also incredibly easy to use.
A protocol converter that connects devices to Industrial Ethernet control systems
The Anybus Communicator Common Ethernet to Common Ethernet enables you to connect any device or equipment to PROFINET, EtherCAT, EtherNet/IP, and Modbus TCP control systems. Anybus Communicators ensure reliable, secure, and high-speed data transfers. The intuitive user interface makes them incredibly easy to use.
A protocol converter that connects CC-Link IE Field and POWERLINK control systems
The Anybus X-gateway CC-Link IE Field Slave to POWERLINK Device enables you to connect any CC-Link IE Field control system to any POWERLINK control system. Anybus gateways ensure reliable, secure, high-speed data transfers between different industrial networks while being easy to use.
A protocol converter that connects EtherNet/IP and PROFINET-IRT control systems
The Anybus X-gateway EtherNet/IP Adapter to PROFINET-IRT Device enables you to connect any EtherNet/IP system to any PROFINET-IRT control system. Anybus gateways ensure reliable, secure, high-speed data transfers between different industrial networks while being easy to use.
A protocol converter that connects PROFIBUS and PROFINET-IRT FO control systems
The Anybus X-gateway PROFIBUS Slave to PROFINET-IRT FO Device enables you to connect any PROFIBUS system to any PROFINET-IRT FO control system. Anybus gateways ensure reliable, secure, high-speed data transfers between different industrial networks while being easy to use.
Replaced by: IN7004852500000
Designed for the integration of any Modbus RTU or TCP server device, or both simultaneously, with a BACnet BMS or any BACnet/IP or BACnet MS/TP controller. This integration aims to make Modbus signals and resources accessible from a BACnet-based control system or device as if they were a part of the BACnet system and vice versa. Please refer to the new product reference for further details.
LonWorks TP/FT-10 to BACnet/IP & MS/TP - 100 points
Integrate any LON device or installation with a BACnet BMS or any BACnet/IP or BACnet MS/TP controller. This integration aims to make LON devices, their network variables (SNVT), and resources accessible from a BACnet-based control system or device as if they were a part of the BACnet system and vice versa.
A protocol converter that connects PROFIBUS devices to EtherNet/IP PLCs
The Anybus X-gateway PROFIBUS Master to EtherNet/IP Adapter enables you to connect any PROFIBUS device or equipment to EtherNet/IP control systems. It can be used when there is no existing PROFIBUS control system. Anybus gateways ensure reliable, secure, high-speed data transfers between different industrial networks while being easy to use.
A protocol converter that connects CC-Link and OPC UA-MQTT control systems
The Anybus X-gateway CC-Link Slave to OPC UA-MQTT enables you to connect any CC-Link system to any OPC UA-MQTT control system. Anybus gateways ensure reliable, secure, high-speed data transfers between different industrial networks while being easy to use.
Modbus TCP & RTU to KNX - 3000 points
Integrate any Modbus RTU or TCP server device, or both simultaneously, with any KNX device or system. This integration aims to make Modbus register data and resources accessible from a KNX system as if they were a part of the KNX system and vice versa.
A protocol converter that connects PROFIBUS and J1939 control systems
The Anybus X-gateway PROFIBUS Slave to J1939 enables you to connect any PROFIBUS system to any J1939 control system. Anybus gateways ensure reliable, secure, high-speed data transfers between different industrial networks while being easy to use.
A protocol converter that connects PROFIBUS devices to EtherCAT PLCs
The Anybus X-gateway PROFIBUS Master to EtherCAT Slave enables you to connect any PROFIBUS device or equipment to EtherCAT control systems. It can be used when there is no existing PROFIBUS control system. Anybus gateways ensure reliable, secure, high-speed data transfers between different industrial networks while being easy to use.
(product was not in this initial legacy product list)
Accessory for Ixxat FRC-EP190 and CANnector
The Ixxat DoubleCAN cable with D-Sub connectors is a practical accessory for FRC-EP190 and CANnector devices. It is used to easily separate two different CAN interfaces, with each connector offering distinct interface options based on the device variant. Its shielded design and twisted wires ensure reliable data transmission.
A protocol converter that connects Modbus TCP devices to PROFINET-IO PLCs
The Anybus X-gateway Modbus TCP Client to PROFINET-IO Device enables you to connect any Modbus TCP device or equipment to PROFINET-IO control systems. It can be used when there is no existing Modbus TCP control system. Anybus gateways ensure reliable, secure, high-speed data transfers between different industrial networks while being easy to use.
A protocol converter that connects ControlNet and EtherCAT control systems
The Anybus X-gateway ControlNet Adapter to EtherCAT Slave enables you to connect any ControlNet control system to any EtherCAT control system. Anybus gateways ensure reliable, secure, high-speed data transfers between different industrial networks while being easy to use.
A protocol converter that connects CAN devices to CC-Link control systems.
The Anybus Communicator – CAN to CC-Link converts CAN protocols to CC-Link, enabling you to connect any CAN-based device or equipment to CC-Link control systems. Anybus Communicators ensure reliable, secure, high-speed data transfers between different industrial networks while being easy to use.
A protocol converter that connects AS-Interface devices to FIPIO PLCs
The Anybus X-gateway AS-Interface Master to FIPIO Slave enables you to connect any AS-Interface device or equipment to FIPIO control systems. It can be used when there is no existing AS-Interface control system. Anybus gateways ensure reliable, secure, high-speed data transfers between different industrial networks while being easy to use.
Content of Delivery
FRC-EP190 device, user manual, power supply cable (2 m, 3-pin Binder socket to 3 x 4 mm banana plugs), USB 2.0 cable (2 m, Type A to Mini Type B), Ethernet cable (2 m), runtime licences for Gateway and RBS, available as download: Advanced Configuration Tool (ACT)
Net Width (mm)
110 mm
Net Height (mm)
180 mm
Net Depth (mm)
50 mm
Net Weight (g)
915 g
Mounting
Panel mount
Current Consumption Type Value at Vcc Nom (mA)
420 mA (12 V DC)
Input Voltage (V)
6 V to 36 V DC
Power Connector
3-pole
Isolation
The FRC-EP190 features four interface islands (X1, X2, X3, X4), each galvanically isolated from the others. Within each island, interfaces for CAN FD, CAN high-speed, digital I/O, and LIN are interconnected. The shielding of the cable and/or the metal collar of a D-Sub connector is directly connected to the housing.
Operating Temperature °C Min
-40 °C
Operating Temperature °C Max
85 °C
Storage Temperature °C Min
-40 °C
Storage Temperature °C Max
85 °C
Relative Humidity
10 to 95 %, non-condensing
Housing Materials
Aluminum
Packaging Material
Cardboard
Configuration
The Ixxat FRC-EP190 is a Linux platform that is able to work standalone without any connected PC. For the standalone function a configuration is needed, that can be created and downloaded to the device via the PC based Ixxat Automotive Configuration Tool (ACT) and an USB connection.
CE
Yes
WEEE Category
IT and telecommunications equipment
ETIM Classification
EC001604
Protection Class IP
IP42
Connectors / Input / Output
3 x RJ45 connectors (1 x Ethernet, 2 x fieldbus), 1 x USB type B port, 1 x USB type A port, 1 x SD card slot, 1 x 7-pin Binder female panel mount connector (remote/debug), 1 x 3-pin Binder male panel mount connector (power), 4 x D-Sub 9 male connectors, 1 x D-Sub HD15 male connector
Contains Battery
No
Brand
Ixxat
Country of Origin
Germany
HS Code
8517620000
Dual Usage
No
Export Control Classification Number (ECCN)
EAR99
Item Number
1.13.0094.10507
CAN Mode
CAN high-speed (ISO 11898-2), CAN low-speed (ISO 11898-3)
CAN Transceiver
TI SN65HVD251
CAN FD Transceiver
TI SN65HVD251
LIN Transceiver
TJA1020
Can't find a distributor or partner or need help to figure out which partner suits you?
No problem, you can always contact your nearest HMS office and let our sales and customer service staff take care of your enquiry.
To download this file you need to submit your email address. You will then get an email with the download link
Invalid email address
| File | Product / versions | Filetype | Size | ||
|---|---|---|---|---|---|
|
FRC-EP190 - CE Declaration of Conformity
|
196.9 KB |
97d52b05-22ce-6706-92f4-ff00001bbfd4
Download
|
| File | Product / versions | Filetype | Size | ||
|---|---|---|---|---|---|
|
Written Offer - FRC FlashImage
|
1.3.4004 | 242.5 KB |
f8bb5405-22ce-6706-92f4-ff00001bbfd4
|
||
|
Ixxat ACT Setup
|
5.22.6451.1 | zip | 226.6 MB |
32465605-22ce-6706-92f4-ff00001bbfd4
|
|
|
Ixxat IxAdmin Setup
|
2.18.3261.0 | zip | 10.9 MB |
8f315a05-22ce-6706-92f4-ff00001bbfd4
|
|
|
Operating system and basic firmware for the devices of the FRC-EP170/190 and CANnector class. After downloading this package, the devices can be upgraded with the IxAdmin and thus brought to the current functional status.
|
FRC FlashImage
|
1.3.4004 | tgz | 33.9 MB |
c4bc4f05-22ce-6706-92f4-ff00001bbfd4
|
|
Open Source License Information - Ixxat IxAdmin
|
2.18.3261.0 | txt | 94.0 KB |
b1315a05-22ce-6706-92f4-ff00001bbfd4
Download
|
|
|
Written-Offer - Ixxat IxAdmin Setup
|
2.18.3261.0 | 118.4 KB |
ed345a05-22ce-6706-92f4-ff00001bbfd4
Download
|
Manuals
| File | Product / versions | Filetype | Size | ||
|---|---|---|---|---|---|
|
FRC-EP190 Installation Guide English
|
2.6 | 1.7 MB |
dbbd4f05-22ce-6706-92f4-ff00001bbfd4
Download
|
| File | Product / versions | Filetype | Size | ||
|---|---|---|---|---|---|
|
Step 3D file for FRC-EP190
|
zip | 2.9 MB |
e08b204e-3208-4cc6-9b68-06a3145882d4
Download
|
Training from HMS Academy reduces the total cost and time of your project and gives improved quality and efficiency of the solution.
HMS offers trainings related to products, technologies and more. This could be in the form of an onsite training, online training or by running one of our E-learning sessions.
Technical Services from HMS helps customers with any type of assistance needed in addition to the products bought from HMS. The Technical Services page offers a list of all services we provide.
The services are provided by HMS’ global team of skilled and experienced engineers who work together with you, providing various services.
Typical activities are project planning, setting up evaluation demos, creating and validating product configurations, providing guidance during field trials, and more.
Technical Services from HMS helps customers with any type of assistance needed in addition to the products bought from HMS. The Technical Services page offers a list of all services we provide.
The services are provided by HMS’ global team of skilled and experienced engineers who work together with you, providing various services.
Typical activities are project planning, setting up evaluation demos, creating and validating product configurations, providing guidance during field trials, and more.
