![CAN range extension in battery test systems](https://media.hms-networks.com/image/upload/c_fill,g_auto,f_auto,q_auto,dpr_auto,e_sharpen,w_1650/v1697024686/Licensed/Images/shutterstock_2147295307.jpg?sf_dm_key=t7wDKZD69F2JcterXJIGshWpcZhyL3Poskqq2AA5vS81)
Language
Enabling connectivity and protection for CAN components
Item number 1.01.0210.20200
The Ixxat CAN-CR100 repeater with two CAN/CAN FD interfaces improves the CAN bus load capacity, establishes a physical coupling of bus systems and offers galvanic isolation. It provides the flexibility to optimize network structures and liberates them from CAN bus structure constraints for optimized operation.
Designed for industrial environments, Ixxat repeaters meet high demands for robustness, temperature ranges, and safety, making them an ideal choice for industrial applications.
The CAN-CR100 helps to optimize CAN/CAN FD network structures. It enables extended network layouts with an increased number of nodes, which couldn't be realized using a common line structure.
CAN repeaters ensure minimal impact on real-time behavior, equivalent to a short line length. Data transmission remains transparent, compatible with various higher layer protocols.
The CAN-CR100 enables the implementation of tree or star topologies and stub lines into the CAN/CAN FD network, helping to minimize cable length and material costs.
The CAN-CR100 ensures system reliability by electrically isolating CAN/CAN FD segments and power, auto-separating network faults and keeping the network operational.
The built-in CAN bus choke offers protection against signal peaks, enhancing the durability of your CAN network.
In case of disturbances in the CAN lines, the repeater automatically disconnects the affected segment and restores it after the fault is resolved, ensuring uninterrupted network operation.
Using the CAN-CR100, network components can be galvanically isolated up to 1 kV. This reliably enhances the protection of the device against damage to electronics caused by voltage peaks.
Equipped with two CAN/CAN FD channels, the CAN-CR100 can be used to establish a physical coupling and galvanic isolation of two segments of both CAN and CAN FD bus systems.
Since there are no integrated bus termination resistors, CAN termination resistors can be positioned adaptively in the network.
Enabling connectivity and protection for CAN components
The Ixxat CAN-CR100 repeater with two CAN/CAN FD interfaces improves the CAN bus load capacity, establishes a physical coupling of bus systems and offers galvanic isolation. It provides the flexibility to optimize network structures and liberates them from CAN bus structure constraints for optimized operation.
Enabling connectivity and protection for CAN components
The Ixxat CAN-CR110/FO with two CAN/CAN FD interfaces, one of which is a Fiber Optic interface, enables the conversion of CAN signals from copper wire to fiber optics. It enhances connectivity in high-electromagnetic interference zones and provides the flexibility to optimize network structures.
Enabling connectivity and protection for CAN components
The Ixxat CAN-CR100 repeater with two CAN/CAN FD interfaces improves the CAN bus load capacity, establishes a physical coupling of bus systems and offers galvanic isolation. It provides the flexibility to optimize network structures and liberates them from CAN bus structure constraints for optimized operation. With integrated termination resistors.
Enabling connectivity and protection for CAN components
The Ixxat CAN-CR120/HV repeater with two CAN/CAN FD interfaces provides a galvanic isolation up to 3 kV for enhanced protection of network segments. It improves the CAN bus load capacity, establishes a physical coupling of bus systems and provides the flexibility to optimize network structures. With integrated termination resistors.
Enabling connectivity and protection for CAN components
The Ixxat CAN-CR210/FO repeater with two CAN interfaces, one of which is a Fiber Optic interface (ST plug), enables the conversion of CAN signals from copper wire to fiber optics. It enhances connectivity in high-electromagnetic interference zones and provides the flexibility to optimize network structures. With integrated CAN backbone interface.
Enabling connectivity and protection for CAN components
The Ixxat CAN-CR210/FO repeater with two CAN interfaces, one of which is a Fiber Optic interface (FSMA plug), enables the conversion of CAN signals from copper wire to fiber optics. It enhances connectivity in high-electromagnetic interference zones and provides the flexibility to optimize network structures. With integrated CAN backbone interface.
Enabling connectivity and protection for CAN components
The Ixxat CAN-CR300 repeater with four CAN/CAN FD interfaces improves the CAN bus load capacity, establishes a physical coupling of bus systems and offers galvanic isolation. It provides the flexibility to optimize network structures and liberates them from CAN bus structure constraints for optimized operation.
Enabling connectivity and protection for CAN components
The Ixxat CAN-CR120/HV repeater with two CAN/CAN FD interfaces provides a galvanic isolation up to 3 kV for enhanced protection of network segments. It improves the CAN bus load capacity, establishes a physical coupling of bus systems and provides the flexibility to optimize network structures.
Enabling connectivity and protection for CAN components
The Ixxat CAN-CR220 repeater with two CAN interfaces provides a galvanic isolation up to 3 kV for enhanced protection of network segments. It improves the CAN bus load capacity, establishes a physical coupling of bus systems and provides the flexibility to optimize network structures. The CAN-CR220 meets DIN/EN 50178 standards.
Enabling connectivity and protection for CAN components
The Ixxat CAN-CR200 repeater with two CAN interfaces and one CAN backbone interface improves the CAN bus load capacity, establishes a physical coupling of bus systems and offers galvanic isolation. Multiple repeaters can be lined up and connected easily via the integrated DINrail bus to create various topologies and optimize network structures.
Enabling connectivity and protection for CAN components
The Ixxat CAN-CR110/FO with two CAN/CAN FD interfaces, one of which is a Fiber Optic interface, enables the conversion of CAN signals from copper wire to fiber optics. It enhances connectivity in high-electromagnetic interference zones and provides the flexibility to optimize network structures. With integrated termination resistors.
Enabling connectivity and protection for CAN components
The Ixxat CAN-CR220 repeater with two CAN interfaces provides a galvanic isolation up to 4 kV for enhanced protection of network segments. It improves the CAN bus load capacity, establishes a physical coupling of bus systems and provides the flexibility to optimize network structures. The CAN-CR220 meets DIN/EN 50178 standards.
Enabling connectivity and protection for CAN components
The Ixxat CAN-CR300 repeater with four CAN/CAN FD interfaces improves the CAN bus load capacity, establishes a physical coupling of bus systems and offers galvanic isolation. It provides the flexibility to optimize network structures and liberates them from CAN bus structure constraints for optimized operation. With integrated termination resistors.
Content of Delivery
CAN FD repeater, user manual
Net Width (mm)
99 mm
Net Height (mm)
113 mm
Net Depth (mm)
22.6 mm
Net Weight (g)
155 g
Mounting
DIN rail mount (bracket included)
Current Consumption Type Value at Vcc Nom (mA)
70
Current Consumption Max value at Vcc nom (mA)
100
Input Voltage (V)
+9 V to +36 V DC
Isolation
1 kV DC/ 1 sec.
Isolation Voltage (kV)
1 kV DC kV
Operating Temperature °C Min
-20 °C
Operating Temperature °C Max
70 °C
Storage Temperature °C Min
-40 °C
Storage Temperature °C Max
85 °C
Housing Materials
Polyamide housing for top hat rail mounting
Packaging Material
Cardboard
CE
Yes
MTBF
No
FCC
Yes
WEEE Category
IT and telecommunications equipment
Protection Class IP
IP20
Connectors / Input / Output
2 x screw terminals, 1 x power connector
Contains Battery
No
Brand
Ixxat
Country of Origin
Sweden
Dual Usage
No
Export Control Classification Number (ECCN)
EAR99
Item Number
1.01.0210.20200
Product Lifecycle State
Active
CAN Mode
CAN high-speed (ISO 11898-2) with CAN choke
CAN FD Mode
ISO CAN FD, nonISO CAN FD
CAN FD Transceiver
MCP2562FD
Can't find a distributor or partner or need help to figure out which partner suits you?
No problem, you can always contact your nearest HMS office and let our sales and customer service staff take care of your enquiry.
To download this file you need to submit your email address. You will then get an email with the download link
Invalid email address
File | Product / versions | Filetype | Size | ||
---|---|---|---|---|---|
In the drawing all plugs are equipped. Not used plugs must be removed.
|
Step 3D file for CAN-CR1x0, CAN-CR300
|
stp | 10.9 MB |
45289905-22ce-6706-92f4-ff00001bbfd4
Download
|
File | Product / versions | Filetype | Size | ||
---|---|---|---|---|---|
CAN CR100, CR110-FO, CR120-HV, CR300 - CE Declaration of Conformity
|
192.2 KB |
f4de2b05-22ce-6706-92f4-ff00001bbfd4
Download
|
Manuals
File | Product / versions | Filetype | Size | ||
---|---|---|---|---|---|
CAN-FD-Repeater CRxx Manual English
|
1.4 MB |
54de2b05-22ce-6706-92f4-ff00001bbfd4
Download
|
File | Product / versions | Filetype | Size | ||
---|---|---|---|---|---|
Ixxat All you need for CAN Brochure MMI119 (English)
|
6 | 4.7 MB |
dda14505-22ce-6706-92f4-ff00001bbfd4
Download
|
Training from HMS Academy reduces the total cost and time of your project and gives improved quality and efficiency of the solution.
HMS offers trainings related to products, technologies and more. This could be in the form of an onsite training, online training or by running one of our E-learning sessions.
Technical Services from HMS helps customers with any type of assistance needed in addition to the products bought from HMS. The Technical Services page offers a list of all services we provide.
The services are provided by HMS’ global team of skilled and experienced engineers who work together with you, providing various services.
Typical activities are project planning, setting up evaluation demos, creating and validating product configurations, providing guidance during field trials, and more.
Technical Services from HMS helps customers with any type of assistance needed in addition to the products bought from HMS. The Technical Services page offers a list of all services we provide.
The services are provided by HMS’ global team of skilled and experienced engineers who work together with you, providing various services.
Typical activities are project planning, setting up evaluation demos, creating and validating product configurations, providing guidance during field trials, and more.